When you recieve your tracker, it will already be connected to an account. For this reason, the only thing you have to do is the installation. This is done by following the steps below.
1) Open your engine compartment and locate the battery.
2) Remove the plastic from the backside and stick the tracker on the battery with the double sided tape.
3) Place the red wire on the Plus+ pole and the black wire on the Minus- pole.
Fasten both wires with the nuts as shown in the example below:
It is very important that the metal at the ends of the wires aren't able to move.
When these are fastened, you can close the hatch and drive off. Your trips will be registered and shown on both our website and in our app.
If you encounter questions regarding the installation, don't hesitate to contact our support at email@example.com or via the phone on +45 70 25 11 00