You can access the cabinet using user credentials, RFID card, or PIN code.
If the cabinet does not open, please see User Setup and Access.
1. Log in with RFID Card
Hold your RFID card against the reader (left side of the cabinet or in front under the keypad).
If you have valid access to keys, the message “Please open door” will appear, and the cabinet will open automatically.
-
When the cabinet opens:
Your accessible keys are displayed.
The LED turns green on the positions where the keys are located.
-
If you have access to multiple keys:
Use the Search function via the keypad.
Use the position buttons to scroll through the list.
-
When a key is highlighted on the display:
The display shows the key’s position.
-
The green LED blinks on that position on the key strip.
2. Log in with PIN Code
Enter your PIN code on the keypad and press #.
If you have valid access to keys, the message “Please open door” will appear, and the cabinet will open automatically.
-
When the cabinet opens:
Your accessible keys are displayed.
The LED turns green on the positions where the keys are located.
-
If you have access to multiple keys:
Use the Search function via the keypad.
Use the position buttons to scroll through the list.
-
When a key is highlighted on the display:
The display shows the key’s position.
The green LED blinks on that position on the key strip.
Tip: Ensure you are properly set up as a user with a valid booking or assigned access rights.